Multimec 3 series
12 products found
Momentary high temperature SMD pushbutton switch
Multimec 3F series has an actuator extended out of the switch body and uses slide-on cap retention system. In addition, it has a right angle version also with an LED. 3FSH9 is a surface mount switch with high temperature housing.
High temperature through-hole pushbutton switch
Multimec 3F series has an actuator extended out of the switch body and uses slide-on cap retention system. 3FTH9 is a through-hole high temperature switch.
Low temperature through-hole pushbutton switch
Multimec 3F series has an actuator extended out of the switch body and uses slide-on cap retention system. In addition, it has a right angle version also with an LED. Switch 3FTL6 has low temperature housing and through-hole terminals.
High temperature SMD tactile switch for variable height caps
3E switch is a switch where actuator is mounted into the hole in the switch body.
High temperature TH tactile switch for variable height caps
3E switch is a switch where actuator is mounted into the hole in the switch body.
Low temperature TH tactile switch for variable height caps
3E switch is a switch where actuator is mounted into the hole in the switch body. The switch is used to mount Varimec caps. 3ETL6 is a low temperature through-hole switch.
High temperature surface mount tactile switch
Simplicity and reliability makes the multimec 3C an excellent switch for build-in and over-mould solutions. In addition the switch is great for foil overlay as it can still function even if the overlay breaks and an upgrade can be done by changing the foil and not the PCB, which is very cost-effective. 3CSH9 is a high temperature surface mount switch.
High temperature through-hole tactile switch
Simplicity and reliability makes the multimec 3C an excellent switch for build-in and over-mould solutions. In addition the switch is great for foil overlay as it can still function even if the overlay breaks and an upgrade can be done by changing the foil and not the PCB, which is very cost-effective. 3CTH9 is a high temperature through-hole switch.
Low temperature through-hole tactile switch
Simplicity and reliability makes the multimec 3C an excellent switch for build-in and over-mould solutions. In addition the switch is great for foil overlay as it can still function even if the overlay breaks and an upgrade can be done by changing the foil and not the PCB, which is very cost-effective.
High temperature SMD switch with a levelled actuator
Multimec 3A is for caps with hinges in order to imitate rocker-function switches. Because of this type of caps the travel of the 3A switch is 2 mm. There is also an illumination option with LED mounted on the switch. 3ASH9 is a high temperature surface mount switch.
High temperature TH switch with a levelled actuator
Multimec 3A is for caps with hinges in order to imitate rocker-function switches. Because of this type of caps the travel of the 3A switch is 2 mm. There is also an illumination option with LED mounted on the switch. 3ATH9 is a high temperature through-hole switch.
Low temperature TH switch with a levelled actuator
Multimec 3A is for caps with hinges in order to imitate rocker-function switches. Because of this type of caps the travel of the 3A switch is 2 mm. There is also an illumination option with LED mounted on the switch. 3ATL6 is a low temperature through-hole switch.